Starting the gussets

Well I started making the gussets for frame 1 and 2. Here is the template for the first one.

Then I copied that over to the plywood and cut out for of each gusset (2 per side).

What I did after that was screw little blocks around the frame on the side that I am not using epoxy first so that it does not move at all.

Then I put a piece of parchment paper under the corner where I will be using the epoxy, better than the frame sticking to the plywood, I will either pull the paper out before it hardens or just tear it off and sand it a bit later.

I then drilled pilot holes in the guesset where I will be placing the screws and put the screws in enough so that they stand on their own, that way it will be quicker to screw them in when the epoxy is in place.

heres how it ended up (Couldnt take pictures during the process as the epoxy dries fast and gets messy)

Then the same thing for the other corners, I managed to finish the gussets on frame 1 and 2 tonight.